 |
 |
 |
|
The APEX AL10C is a 10,000-lb clearfloor two-post lift engineered for shops that demand unrestricted under-vehicle access, heavy-duty strength, and long-term reliability. Featuring a direct-drive hydraulic lifting system, rugged overhead box-beam construction, and advanced safety systems, the AL10C delivers smooth, consistent lifting performance for a wide range of vehicles. Previously sold under the GrandPrix brand, the AL10C now carries the APEX name while retaining the same proven design, performance, and BendPak-backed support.
- APEX AL10C Two Post Car Lift - 10,000-Lb Capacity
10,000-lb Lifting Capacity
Supports a wide range of passenger vehicles, performance cars, and light trucks. Clearfloor Two-Post Design
Provides unobstructed access beneath the vehicle for improved workflow. Direct-Drive Dual Hydraulic Cylinders
Reduce moving parts while delivering smooth, consistent lifting performance. Rugged Overhead Box-Beam Construction
Enhances structural stability and reduces column stress. Padded Overhead Safety Shutoff Bar
Automatically stops lift travel if a vehicle is raised too high. Symmetric and Asymmetric Arm Configurations
Allows fast, flexible vehicle positioning. Triple-Telescoping Front Arms and Extended Rear Arms
Accommodates a wide range of wheelbases and frame designs. Automatic Safety Locks Every 3 Inches
Ensures secure load holding throughout the lift range. Automatic Arm Restraints
Prevent unintended arm movement during service. 36-Month Limited Warranty
Industry-leading coverage backed by BendPak support.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Lifting Capacity 10,000 lbs. (4,536 kg) Max. Capacity / Front Axle 5,000 lbs. (2,268 kg) Max. Capacity / Rear Axle 5,000 lbs. (2,268 kg) A - Height Overall 148" (3,759 mm) B - Width Overall (at Baseplate) 137.5" (3,492 mm) C - Width Outside of Columns 128.5" (3,264 mm) D - Floor to Overhead Switch Bar 142.5" (3,619 mm) E - Width Inside Columns 114.5" (2,908 mm) F - Front Arm Reach (Min.) 22.5" (571 mm) F - Front Arm Reach (Max.) 43.25" (1,099 mm) G - Rear Arm Reach (Min.) 33.5" (845 mm) G - Rear Arm Reach (Max.) 53.25" (1,353 mm) H - Min. Pad Height 3.9" (100 mm) J - Max. Lift Height (Pad + 63mm Adapt.) 76.5" - 78.5" (1,943 - 1,994 mm) K - Drive-Thru Clearance 103" (2,618 mm)
Screw Pad Adjustment Motor 220 VAC / 60Hz / 1 Ph Time of Full Rise 65 seconds Max. Load Per Arm 2,500 lbs. (1,134 kg) Shipping Weight 1,545 lbs. (703 kg)
|
|
|
|
|
|
|