|
|
|
|
|
|
|
|
|
|
|
|
|
XPR-12C 12,000 Lb. Capacity, Clearfloor, Triple-Telescope Arms-All Four
When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12C, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before. Like all our clearfloor lifts, this lift offers superior direct-drive performance, cutting-edge technology, top of the line materials and design that's ahead of its time. Fits in shops with ceilings higher than 14', and it won't crowd your floor while you work beneath a vehicle.
|
XPR-12C-192 Extra Tall, 12,000 Lb. Capacity, Clearfloor, Triple-Telescope Arms-All Four
When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12C-192, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before. Like all our clearfloor lifts, this lift offers superior direct-drive performance, cutting-edge technology, top of the line materials and design that's ahead of its time. Fits in shops with ceilings higher than 14', and it won't crowd your floor while you work beneath a vehicle.
|
XPR-15C-192 Extra Tall, 15,000 Lb. Capacity, Clearfloor, Standard Arms
When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-15C-192, for instance, has an astounding 15,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before. Like all our clearfloor lifts, this lift offers superior direct-drive performance, cutting-edge technology, top of the line materials and design that's ahead of its time. Fits in shops with ceilings higher than 14', and it won't crowd your floor while you work beneath a vehicle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
XPR-18C 18,000 Lb. Capacity, Clearfloor, Standard Arms
When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-18C, for instance, has an astounding 18,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before. Like all our clearfloor lifts, this lift offers superior direct-drive performance, cutting-edge technology, top of the line materials and design that's ahead of its time. Fits in shops with ceilings higher than 14', and it won't crowd your floor while you work beneath a vehicle.
|
XPR-15C 15,000 Lb. Capacity, Clearfloor, Standard Arms
When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-15C, for instance, has an astounding 15,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before. Like all our clearfloor lifts, this lift offers superior direct-drive performance, cutting-edge technology, top of the line materials and design that's ahead of its time. Fits in shops with ceilings higher than 14', and it won't crowd your floor while you work beneath a vehicle.
|
XPR-18C-192 Extra Tall, 18,000 Lb. Capacity, Clearfloor, Standard Arms
The BendPak XPR-18C-192 future-proofs your business. Get the same exceptional direct-drive lifting performance, clearfloor convenience and super-duty maximum capacity as with the standard XPR-18C-192, but with an added 24” up top. Make sure your business can specialize in taller, “Sprinter” delivery, service and transportation vehicles before it’s too late.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
XPR-12FD 12,000 Lb. Capacity, Floorplate, Direct-Drive
|
XPR-10-168 Extra Tall, Dual-Width, 10,000 Lb. Capacity, Clearfloor
The safe and rugged XPR-10-168 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet wimple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak's XPR two-post models feature dual "direct-drive" low-pressure cylinders, maintenance free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configurations for increased arm positioning versatility.
|
Call for Pricing
Our standard-height GP-7 is fit for garages with 13' ceilings and offers a full 78" max rise. These dimensions are similar to other two-post lifts, but the GP-7 offers a much slimmer profile than other lifts. This makes it ideal for narrow garages looking to fit more lifts in limited space.
FEATURES
- Single hidden overhead cylinder
- Low-Pro™ arms for sports cars
- Taller lift carriages
- Automatic safety locks
- Redundant safety cables
- Multiple lock positions
- 5-Year Warranty
Specifications:
- 7,000-lb. lifting capacity
- Telescoping Low-Pro™ arms for sports cars
- Bi-metric asymmetric & symmetric arm configuration
- Lowered arm tube supports
- Automatic arm restraints
- Single release-point operation
- Taller lift carriages
- Automatic safety locks
- Single hidden hydraulic cylinder
- (2) redundant safety cables
- Multiple lock positions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Call for Pricing
The GP-7LC is a shortened version of the standard GP-7, accommodating ceilings as low as 10' while offering an impressive 68" max rise. This model is truly designed for homeowners who until now could never fit a two-post lift in their garage.
FEATURES
- Single hidden overhead cylinder
- Low-Pro™ arms for sports cars
- Taller lift carriages
- Automatic safety locks
- Redundant safety cables
- Multiple lock positions
- 5-Year Warranty
Specifications:
- 7,000-lb. lifting capacity
- Telescoping Low-Pro™ arms for sports cars
- Bi-metric asymmetric & symmetric arm configuration
- Lowered arm tube supports
- Automatic arm restraints
- Single release-point operation
- Taller lift carriages
- Automatic safety locks
- Single hidden hydraulic cylinder
- (2) redundant safety cables
- Multiple lock positions
|
Call for Pricing
The GP-7LCS is a truly one-of-a-kind design. Because it fits in garages with ceilings as low as 9', it boasts the lowest columns ever found on a permanent two-post lift. It can be installed in virtually every garage on the planet and still offers an impressive 58" rise.
FEATURES
- Single hidden overhead cylinder
- Low-Pro™ arms for sports cars
- Taller lift carriages
- Automatic safety locks
- Redundant safety cables
- Multiple lock positions
- 5-Year Warranty
Specifications
- 7,000-lb lifting capacity
- Telescoping Low-Pro™ arms for sports cars
- Bi-metric asymmetric & symmetric arm configuration
- Lowered arm tube supports
- Automatic arm restraints
- Single release-point operation
- Taller lift carriages
- Automatic safety locks
- Single hidden hydraulic cylinder
- (2) redundant safety cables
- Multiple lock positions
|
Call for Pricing
The XPR-9S two-post lift offers automotive service professionals unparalleled lifting performance and lasting quality. State-of-the-art technology, top-notch materials, a forward-looking design and a 9,000-lb. lifting capacity make this lift a fantastic purchase.
Features:
- 9,000-lb lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Shorter column for low-ceiling installations
- Extended rise gives you over 6 feet of under clearance
- Single-piece columns
- Single-point safety release
- Drop-end arms provide a lower pad height
- Chain lifting system combined with dual hydraulic cylinders
- Electric / hydraulic power system
- Large 20" x 19" steel base plates
- Self-lubricating dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
- 4-piece 63 mm stackable adapter set comes standard
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Call for Pricing
The XPR-9S-LP two-post lift offers automotive service professionals unparalleled lifting performance and lasting quality. State-of-the-art technology, top-notch materials, a forward-looking design and a 9,000-lb. lifting capacity make this lift a fantastic purchase.
Features:
- 9,000-lb lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Shorter column for low-ceiling installations
- Extended rise gives you over 6 feet of under clearance
- Single-piece columns
- Single-point safety release
- Drop-end arms provide a lower pad height
- Chain lifting system combined with dual hydraulic cylinders
- Electric / hydraulic power system
- Large 20" x 19" steel base plates
- Self-lubricating dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
- 4-piece 63 mm stackable adapter set comes standard
|
Call for Pricing
Every XPR-10AS features Direct-Drive technology that’s only available with BendPak. The asymmetrical design of this lift has rotated columns, which makes it easier to enter and exit the vehicle and reduces the chance of door dings and dents.
Features:
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive‐thru configuration
- Double‐telescoping screw pads offer increased versatility
- Added overhead safety shutoff bar
- Exclusive Tru‐Metric arm design for more versatile arm positioning
- 30° rotated single‐piece columns
- Single‐point safety release
- Drop‐end arms provide a lower pad height
- Dual hydraulic direct‐drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2" aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- Triple‐telescoping arm design
- Versatile drop‐in contact pads with stackable adapters
- ETL Approved
|
Call for Pricing
Every XPR-10AS features Direct-Drive technology that’s only available
with BendPak. The asymmetrical design of this lift has rotated columns,
which makes it easier to enter and exit the vehicle and reduces the
chance of door dings and dents.
Features:
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive‐thru configuration
- Double‐telescoping screw pads offer increased versatility
- Added overhead safety shutoff bar
- Exclusive Tru‐Metric arm design for more versatile arm positioning
- 30° rotated single‐piece columns
- Single‐point safety release
- Drop‐end arms provide a lower pad height
- Dual hydraulic direct‐drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2" aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- Triple‐telescoping arm design
- Versatile drop‐in contact pads with stackable adapters
- ETL Approved
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Call for Pricing
The XPR-10AXLS model adds 6” of lift and extends the overall height by 6”. Taller people know that the difference between stooping and standing under a two-post lift can be the difference between severe back/neck pain and working in total comfort.
Features:
- Lift arms shown with optional foot guards
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Single‐piece columns
- Dual hydraulic direct‐drive cylinders
- Automatic arm restraints
- Lowered arm tube supports
- Maintenance-free UHMW load bearings
- Oversized 59" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Single‐point safety release
- Safety locks in each column spaced every 3"
- Automatic overhead shutoff
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2" aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- ALI Certified
|
Call for Pricing
The XPR-10AXLS-LP model adds 6” of lift and extends the overall height by 6”. Taller people know that the difference between stooping and standing under a two-post lift can be the difference between severe back/neck pain and working in total comfort.
Features:
- Lift arms shown with optional foot guards
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Single‐piece columns
- Dual hydraulic direct‐drive cylinders
- Automatic arm restraints
- Lowered arm tube supports
- Maintenance-free UHMW load bearings
- Oversized 59" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Single‐point safety release
- Safety locks in each column spaced every 3"
- Automatic overhead shutoff
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2" aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- ALI Certified
|
Call for Pricing
The XPR-10S two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that's ahead of its time and a 10,000-lb. lifting capacity.
Features:
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive‐thru configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Telescoping arm design for more versatile arm positioning
- Single‐piece columns
- Single‐point safety release
- Drop‐end arms provide a lower pad height
- Dual hydraulic direct‐drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2" aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- Triple‐telescoping front arms
- ETL Approved
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Call for Pricing
Tall techs no longer have to strain themselves while they work. The XPR-10XLS is a high-reach symmetrical two-post lift that can be customized with an optional extension kit and/or Low-Pro™ arms. Perfect for vehicles of all sizes. A must-have tool to help taller techs stand upright while they work.
Features:
- Lift arms shown with optional foot guards
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Single‐piece columns
- Dual hydraulic direct‐drive cylinders
- Automatic arm restraints
- Lowered arm tube supports
- Maintenance-free UHMW load bearings
- Oversized 59" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Single‐point safety release
- Safety locks in each column spaced every 3"
- Automatic overhead shutoff
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2" aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- ALI Certified
|
Call for Pricing
Tall techs no longer have to strain themselves while they work. The XPR-10XLS-LP is a high-reach symmetrical two-post lift that can be customized with an optional extension kit and/or Low-Pro™ arms. Perfect for vehicles of all sizes. A must-have tool to help taller techs stand upright while they work.
Features:
- Lift arms shown with optional foot guards
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Single‐piece columns
- Dual hydraulic direct‐drive cylinders
- Automatic arm restraints
- Lowered arm tube supports
- Maintenance-free UHMW load bearings
- Oversized 59" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Single‐point safety release
- Safety locks in each column spaced every 3"
- Automatic overhead shutoff
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2" aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- ALI Certified
|
Call for Pricing
If you need to service vehicles up to 12,000 lbs. capacity with extremely long wheelbases, BendPak's XPR-12CL-LTA offers nearly 72 inches of reach, compared to 58 inches on our standard triple-telescoping arms. Ideal for hard-to-reach lift points that other two-post lifts cannot access.
Features:
- 12,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Padded overhead safety shutoff bar
- Extended height top-beam provides greater overhead clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty 1/2" aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- 16-piece specialty adapter set includes four 6" stackable adapters, four 3" stackable adapters, four - polyurethane contact pads and four frame cradle pads
- Convenient storage is included for truck and van adapters
- Long-reach triple-telescoping arms provide increased range for lifting point access
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Call for Pricing
The XPR-10S-LP two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that's ahead of its time and a 10,000-lb. lifting capacity.
Features:
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive‐thru configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Telescoping arm design for more versatile arm positioning
- Single‐piece columns
- Single‐point safety release
- Drop‐end arms provide a lower pad height
- Dual hydraulic direct‐drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2" aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- Triple‐telescoping front arms
- ETL Approved
|
C7000 7,000 lb. Portable Two Post Auto Lift
The all new revolutionary Chrome C-7000 is simply the most versatile two post lift in existence. Because it is not limited by cables it can be mounted at any width up to 120" This lift can be taken down and stored in less than 10 minutes by a single operator. With the flush mounting system you can maintain %100 of your usable floor space. Lift does not include wheels mounted to back of posts.
|
Power Unit 110V Long Tank
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The BP-9 lift designed for low ceiling garages. The BP series base-plate two post lifts are stronger and more convenient to operate than most lifts in the world. With single-point safety release, makes it easier for the operators to unlock both column locks from one column. The Chain protection cover prevents the chain from slipping off. |
| |
| | | | | | | Features
- 9,000 lb lifting capacity
- commercial grade 2-post base plate lift is designed and built for any professional shops and home garages to fit low ceiling workshop environment without overhead obstructions.
- Single-point safety release allows the operator to unlock the safety locks from both Columns simultaneous.
- Dual locking system for additional safety.
- 4 three-stage arms are suitable for more vehicles.
- Automatic arm restraints keep the arms locked in their proper positions.
- Self-lubricating UHMW Polyethylene sliders and bronze bushings.
- Aircraft quality cable is used for synchronization.
- Detachable foot guard and tool tray allow for a clutter free work space.
Includes - Stackable Rubber Pads
- 1.5", 2.5", 5" Extension Adapters
Optional 2 Piece Base Extension Kit #20801
|
|
|
NT-9 9,000 lb Two Post Auto Lift We provide you with the best value available for a two post floor plate automotive lift. We want you to have the absolute best lift for the best price and are confident that we can provide that lift. The NT.9 comes with more features at a better price than any other lift on the market. Success in your new business or in your own home shop is important to us. We make it affordable to start your business or to have your own dream garage at home. Three stage front arms provide excellent reach on a wide variety of vehicles. Floor Plate to cover cables and hose and fit under low ceiling. Includes Power Unit/Motor and floor mounting hardware.
|
AMGO® Hydraulics OH-9 fits in garages with 12.5 ft ceilings and has a lifting height of 75”. With a 9,000lb lifting capacity and a great price, this is the perfect lift for any shop or garage enthusiast by having both configuration of Symmetric and Asymmetric arms. Super-Asymmetric®
Super asymmetric arms allow you to load different vehicles in an asymmetric or symmetric configuration. Self-lubricating UHMW polyethylene sliders, rubber door guards to protect your vehicle. Arm Lock
Lifting arm lock automatic release device, high strength gear rack, more stable and safer. |
| |
| | | | | | | Features
- 9,000 lb lifting capacity
- Dual direct drive hydraulic cylinders made to high standards
- Super-Asymmetric Arm design, 3 piece back arms & 2 piece front arms that can be adjusted to an asymmetric or symmetric fit.
- 3/8" aircraft quality cable is used for synchronization
- Single point safety release, allows the operator to disengage both columns simultaneously.
- Self lubricating UHMW Polyethylene sliders and bronze bushings.
- Clear floor design, provides unobstructed floor use.
- Overhead safety shut off device measures vehicle damage.
- Standard adjustable heights accommodates varying ceiling heights
- Extension adapters - With three different sizes of stackable adapters to adjust the height of rubber pad freely.
Includes - Stackable Rubber Pads
- 1.5", 2.5", 5" Extension Adapters
Specs:
Click on Image to Enlarge it
 |
| | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NTO-9AE 9,000 lb Two Post Auto Lift Our Economy model 9,000 lb. Overhead Two Post Lift features include dual point safety releases, truck adapters, anchor bolts f
|
- Single piece column construction
- Padded 'shut off' bar w/ kill switch
- Low profile 'drop in' swivel pads w/ 1 1/2" adjustable height
- 4 each stackable 1 3/8" & 4" 'drop in' height adapters
- Reduced overall width w/ front-side power unit monitoring
- Internal hose routing w/ integrated hose guards
- Rubber door guards
|
- 9000 lb capacity
- Symmetric Lift Arms
- Low profile swing arm design
- Low profile 'drop in' lift pads
- 1 5/16" & 5" stackable height adapters
- Saddle pad adapters (1 pair)
- Dual point lock release
- Automatic arm restraints
- Chain drive cylinders
- Durable power coat finish
- Limited Warranty policy (5yr structural/1yr parts)
|
|
|
