 |
 |
 |
|
Call for Pricing
When you need to align truck wheels, BendPak’s free-floating slip plates and galvanized steel turn plates make the job easy to get done right the first time.
- Capacity
- Lifting Capacity*: 18,000 lbs. (8,165 kg)
- Max Capacity / Front Axle: 9,000 lbs. (4,082 kg)
- Max Capacity / Rear Axle: 9,000 lbs. (4,082 kg)
Rise
- Min. Runway Height: 10.5" (267 mm)
- Max. Rise: 60" (1,524 mm)
- Max. Lifting Height: 70.5" (1,791 mm)
- Time to Full Rise: 75 seconds
Outside Dimensions
- Overall Width: 154" (3,912 mm)
- Outside Length: 257" (6,528 mm)
- Overall Length: 297" (7,544 mm)
- Height of Columns: 93" (2,362 mm)
Inside Dimensions
- Width Between Columns: 134" (3,404 mm)
- Drive-Thru Clearance: 109" (2,769 mm)
Runways
- Runway Width: 22" (559 mm)
- Length of Runways: 249" (6,325 mm)
- Width Between Runways: 38" (965 mm) or 56" (1,422 mm)
Alignment
- Min. 4-Wheel Alignment: 83" (2,108 mm)
- Max. 4-Wheel Alignment: 138" (3,505 mm)
- Max. 2-Wheel Alignment: 211" (5,359 mm)
Minimum Wheelbase
- Rated Capacity: 185" (4,699 mm)
- 75% Capacity: 160" (4,064 mm)
- 50% Capacity: 135" (3,429 mm)
- 25% Capacity: 110" (2,794 mm)
Locking
- Locking Positions: 9
- Lock Spacing: 6
Power Unit
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
Shipping
- Weight: 6,790-lbs. (3,079 kg)
- Dimensions: 265'' x 26'' x 38'' (6,731 mm x 660 mm x 965 mm)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 18,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Multi-caster slip plates
- Spring-loaded automatic safety locks
- Supersized 12" diameter cable sheaves
- Four stainless steel lifting cables
- Grease nipples on every sheave and axle
- Single hydraulic under-runway cylinder
- Integrated hydraulic flow restrictor
- Durable powder coat finish
- Push-button pneumatic lock release
- Secondary lock system on constant guard
- Enclosed cables, airlines, safety latches
- Multiple adjustable locking positions
- Maintenance-free power system
- Conveniently located controls
- 12" x 12" base plates
- Non-skid runways
- Optional rolling jacks available
|
|
|
|
|
|
|