|
|
|
|
|
|
|
|
|
|
|
Call for Pricing
This is our most powerful rolling bridge jack ever, with 25,000 lbs. of muscle meant to service some of the biggest commercial fleets on earth. Use this jack on the 40,000-lb. capacity HDS-40 four-post truck lift to perform wheel service on almost any heavy-duty vehicle on wheels.
|
Call for Pricing
The powerful 18,000-lb. capacity RBJ18000 rolling bridge jack is made for use with your HDS-35 or HDS-40 four-post lift series. Sometimes a vehicle’s center of gravity that isn’t in the exact middle of the vehicle. In this case, even a 30,000-lb. vehicle might require a jack that is rated for more than half the vehicle’s weight.
|
Call for Pricing
Our 15,000-lb. capacity bridge jack is made just for the HDS-35 four-post lift. This particular car lift is truly made for massive trucks and commercial equipment. Check out the RBJ15000 jack if you need to perform full wheel service on heavy-duty vehicles.
|
|
|
|
|
|
|
|
|
|
|
|
|
Call for Pricing
BendPak’s 9,000-lb. capacity rolling bridge jack is ideal for use on the HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity. This jack is ideal for heavier trucks and SUVs.
|
Call for Pricing
This 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.
|
Call for Pricing
This 6,000-lb. capacity rolling bridge jack is specifically designed for use with the Quatra scissor lift. The RBJ6000 provides you with the ability and added versatility to raise the wheels off the runways of your scissor lift.
|
|
|
|
|
|
|
|
|
|
|
|
|
Call for Pricing
BendPak RBJ4500 rolling bridge jacks are designed to hold up to 4,500 lbs. Use this rolling bridge jack with your BendPak HD-9 4-Post series car lift for increased versatility and productivity.
|
Extra steel approach ramps for Tuxedo FP8K four post lift
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Unit 110V Long Tank
|
SPX 220 V Power Unit for lifts
|
- Low Profile Design
- 3 safety lock positions
- Power coat finish
- Smooth sliding operation
- Hand pump, no air needed
- 3500 lbs capacity allows passenger car and most light trucks
- 1 1/2" and 5" extension included (set of two each)
- Adjustable width fits most lifts
|
|
|
|
|
|
|
|
|
|
|
|
|
NSS-8 Storage Lift Bridge Jack This Bridge Jack is for the NSS-8 and NSS-8XLT Lifts ONLY. This item is not free shipping unless purchased with a lift.
|
NOS9000 Storage Lift Bridge Jack This Bridge Jack is for the NOS9000 and NOS9000XLT Lifts ONLY. Min Gap Width | 31" | Max Gap Width | 46" | Collapsed Pad Width | 39" | Extended Pad Width | 63" | Collapsed Pad Height | 4.75" | Extended Pad Height | 11" | Max Height With Extensions | 16.5" | Power Type | Manual Pump |
|
- Universal roller body design with dual 'spring loaded' precision roller bearing and guide wheels with adjustable height for low, medium, and high jack rail configurations
- Rolls on top edge of jack rails for smooth maneuverability
- Telescoping support arms
- Air/hydraulic operation
- Dual protective scissor skirts
- Two locking height positions
- Rubber height adapters (1 pair)
- Ships in durable wooden crate
Recommended Lift: Acceptable Lift:
|
|
|
|
|
|
|
|
|
|
|
Features: *Universal roller body design with dual 'spring loaded' precision roller bearing and guide wheels with adjustable height for low, medium, and high jack rail configurations *Rolls on top edge of jack rails for smooth maneuverability *Telescoping support arms *Air/hydraulic operation *Dual protective scissor skirts *Two locking height positions *Rubber height adapters (1 pair) *Ships in durable wooden crate
Specifications: Lift Capacity: 8000 pounds Telescoping support arms min/max: 38 3/8" - 60" Lifting arms min/max: 35 7/16" - 57 1/2" Lifting height min/max: 6 9/16" - 14 7/8" "High mount" adjustable roller body bracket height: 1" Stackable adapter heights: 1 5/16" & 5" (1 pair) Locking positions: 1 each Required power: 100-125 PSI/10-20 CFM Ship Weight: 426 lbs. Package Size: 43" x 29" x 11"
Recommended Lift SL-12K-A Acceptable Lift FP14KA FP14KA-C FP14KO-A
|
- Universal roller body design with dual 'spring loaded' precision roller bearing and guide wheels with adjustable height for low, medium, and high jack rail configurations
- Rolls on top edge of jack rails for smooth maneuverability
- Telescoping support arms
- Air/hydraulic operation
- Dual protective scissor skirts
- Two locking height positions
- Rubber height adapters (1 pair)
- Ships in durable wooden crate
Recommended LiftAcceptable Lift
|
|