 |
 |
 |
|
- Capacity
- Lifting Capacity: 14,000 lbs. (6,350 kg)
- Max Capacity / Front Axle: 7,000 lbs. (3,175 kg)
- Max Capacity / Rear Axle: 7,000 lbs. (3,175 kg)
Rise
- Min. Runway Height: 7.625" (194 mm)
- Max. Rise: 70" (1,778 mm)
- Max. Lifting Height: 77.625" (1,972 mm)
- Time to Full Rise: 60 seconds
Outside Dimensions
- Overall Width: 130" (3,302 mm)
- Outside Length: 243" (6,172 mm)
- Overall Length: 271" (6,883 mm)
- Height of Columns: 93" (2,362 mm)
Inside Dimensions
- Width Between Columns: 120" (3,048 mm)
- Drive-Thru Clearance: 98" (2,489 mm)
Runways
- Runway Width: 20" (508 mm)
- Length of Runways: 229" (5,817 mm)
- Width Between Runways: 37.5" (953 mm) or 51" (1,295 mm)
- Runway Centerline: 57.5" (1,461 mm) or 71" (1,803 mm)
- Outside Edge of Runways: 77.5" (1,969 mm) or 91" (2,311 mm)
Minimum Wheelbase
- Rated Capacity: 165" (4,191 mm)
- 75% Capacity: 140" (3,556 mm)
- 50% Capacity: 115" (2,921 mm)
- 25% Capacity: 95" (2,413 mm)
Locking
- Locking Positions: 13
- Lock Spacing: Every 4" (102 mm)
Power Unit
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
Shipping
- Weight: 2,735 lbs. (1,240.5 kg)
- Dimensions: 239'' x 22'' x 42'' (6,070 mm x 558 mm x 1,066 mm)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- - 14,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Mid to long-style approach ramps for low ground clearance vehicles
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2" aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Oversized self-lubricating cable rollers
- Rugged 1.75" roller axles
- Multi-position safety locks in each column
- Customizable power unit location
- Approach ramps incorporate built-in rear-wheel chocks
- Independent backup slack-cable safety latches
- Runways feature non-skid surface
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 7,000-lb. capacity rolling jacks available (Model RBJ7000)
- ETL approved
|
|
|
|
|
|
|