 |
 |
 |
|
14,000-lb. Capacity Standard Length Car Lift
BendPak's "HDS‐Series" four‐post lifts are a whole new breed of rugged. They’re newly engineered car and truck lifts that work better, are built to last, and feature upgrades that increase safety, durability and productivity.
- •Lifting capacity*: 14,000 lbs. / 6,350 kg ◦*Max capacity / front axle: 7,000 lbs. / 3,175 kg
- ◦*Max capacity / rear axle: 7,000 lbs. / 3,175 kg
- •Overall width: 130" / 3,301 mm
- •Outside length: 213" / 5,408 mm
- •Overall length: 241" / 6,131 mm
- •Height of columns: 93" / 2,362 mm
- •Runway min height: 7-5/8" / 192 mm
- •Max rise: 70" / 1,778 mm
- •Max lifting height: 77-5/8" / 1,970 mm
- •Width between posts: 120" / 3,046 mm
- •Runway width: 20" / 508 mm
- •Width between runways: 37-1/2" – 51" / 952 mm – 1,295 mm
- •Runway centerline: 57-1/2" - 71" / 1,460 mm - 1,803 mm
- •Outside edge of runways: 77-1/2" - 91" / 1,968 mm - 2,311
- •Drive-thru clearance: 98" / 2,482 mm
- •Length of runways: 199" / 5,054 mm
- •Min wheelbase @ rated capacity: 140" / 3,556 mm
- •Min wheelbase @ 75% capacity: 120" / 3,048 mm
- •Min wheelbase @ 50% capacity: 100" / 2,540 mm
- •Min wheelbase @ 25% capacity: 80" / 2,032 mm
- •Locking positions: 13
- •Lock spacing: every 4" / 102 mm
- •Lifting time: 60 sec
- •Motor: 220 VAC / 60 Hz / 1 Ph
- •Shipping weight: 2,105 lbs. / 955 kg
- •Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm
- Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- •14,000-lb. lifting capacity
- •Mid- to long-style approach ramps for low ground clearance vehicles
- •Runways include rail-kit for optional accessories
- •Single hydraulic cylinder mounted underneath runway
- •Fully enclosed lifting cables, safety locks, and sheaves
- •Internal anti-sway slider blocks in each column
- •Pneumatic push-button safety release
- •Features heavy-duty 1/2" aircraft cable
- •Safety locks enclosed in columns minimize pinch points
- •Oversized sheave diameter reduces cable fatigue
- •Oversized self-lubricating cable rollers
- •Rugged 1-3/4" roller axles
- •Multi-position safety locks in each column
- •Customizable power unit location
- •Approach ramps incorporate built-in rear-wheel chocks
- •Independent backup slack-cable safety latches
- •Runways feature non-skid surface
- •Optional drive-thru ramps available
- •Optional drip trays available
- •Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
- •ETL approved
|
|
|
|
|
|
|