Home > Four-Post Lifts >

BendPak GP-9F Package GrandPrix Series 9,000 Lb. 4-Post / Includes Caster Kit, Drip Trays and Aluminum Ramps
BendPak GP-9F Package GrandPrix Series 9,000 Lb. 4-Post / Includes Caster Kit, Drip Trays and Aluminum Ramps


 
Alternative Views:




Product Code: GP-9F-
Qty:

Description Technical Specs
 
Call for Pricing

The GrandPrix GP-9F is the perfect home car lift. Its slim, toughened boxed-steel columns are preferred by many for home lifting applications. Maintenance is minimal and easy to perform.


Features
    • BendPak’s proven legacy gives you an edge in performance, service and cost of ownership.
    • Designed to be fastened to the floor or free-standing.
    • Comes standard with caster kit, drip trays, mobile jack tray, aluminum approach ramps, hardened steel tire stops and hard rubber wheel chocks.
    • Boxed-steel columns are made from structural 4.75” x 4.75" welded steel tubing.
    • Columns feature 12” x 12” baseplates 5/8” thick.
    • Manual dead bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
    • 3/4" thick steel safety locks are spring loaded for automatic and solid engagement.
    • 13 positive locking positions are spaced every 4 inches.
    • Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
    • Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
    • ¾” thick safety locks are securely trapped by the full-perimeter cross tube sleeves and can't become dislodged or disengaged.
    • Welded-steel runways feature utility rail for jack tray and drip trays and other accessories.
    • Runways are welded and boxed for extra strength.
    • Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
    • Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
    • Low-profile runways are only 5" high to accommodate low ride-height vehicles.
    • Hardened steel safety lock linkages use 3/8” molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
    • Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
    • 5/8" thick top caps.
    • Sheave axles feature hardened steel collars and snap rings.
    • Pull out tire stops on both ends of the lift that allows drive through capability.
    • Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
    • Cable keepers assures cables remain safely secure to the sheaves.
    • Pre-assembled cables simplifies installation.
    • 36" aluminum approach ramps are gusseted to eliminate flex and bending.
    • Non-marring heavy-duty poly caster wheels will not damages painted floor surfaces.
    • Durable powder coat finish.
    • 3/4" runway bolts provide positive attachment with increased safety factor.
    • Operator controls are simple to use, well-placed and ergonomically advanced to reduce operator strain and fatigue and increase safety.
    • Electric/hydraulic power system.
    • Single hydraulic cylinder underneath runway.
    • Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.

Share your knowledge of this product. Be the first to write a review »